Audison 200mm (8'') Car Subwoofer APS 8 R
Category: Audison
Specifications
Maximum Power
500W Peak Power
Nominal Power
250W Continuous Power
Sensitivity
84dB
Impedance
4Ω
Magnet
High Density Flux Ferrite
Cone
Water-Repellent Pressed Paper
Comp
Single Coil Subwoofer
Xmech
16,5 (0.65)
Details
200mm (8'')
With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AP8.9 bit or AP4.9 bit / AP4 D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking-mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
View more about Audison 200mm (8'') Car Subwoofer APS 8 R on main site